Workshop Calculation & Science Mock Test 1iTi 2nd Year WC&S MCQ / By Er. Roshan Tajne / January 23, 2022 Created by Er. Roshan TajneWorkshop Calculation & Science 2nd YearWorkshop Calculation & Science Mock Test 1 1 / 251) Which is the suitable nitriding process for all alloyed and unalloyed steels?सभी मिश्रधातु और मिश्रधातु वाले स्टील्स के लिए उपयुक्त नाइट्राइडिंग प्रक्रिया कौन सी है? A) Silver nitriding सिल्वर नाइट्राइडिंग B) Nitriding in salt-bath नमक स्नान में नाइट्राइडिंग C) Nitriding in Quenching tank शमन टैंक में नाइट्राइडिंग D) Gas nitriding गैस नाइट्राइडिंग 2 / 252) What is the area of the semicircle, if the diameter is 14 cm?यदि व्यास 14 सेमी है, तो अर्धवृत्त का क्षेत्रफल क्या है? A) 70 cm² B) 76.93 cm² C) 75.06 cm² D) 86.93 cm² 3 / 253) What are the three consecutive numbers if there sum is 42?यदि योग 42 है तो लगातार तीन संख्याएँ क्या हैं? A) 11,12,13 B) 12,13,14 C) 14,15,16 D) 13,14,15 4 / 254) What is the other term of pocket reference in engineering works?इंजीनियरिंग कार्यों में पॉकेट रेफरेंस का दूसरा टर्म क्या है? A) New book नई किताब B) Hand tool हाथ उपकरण C) Good book अच्छी किताब D) Hand book हैंड बुक 5 / 255) What is the process of heat treatment?ऊष्मा उपचार की प्रक्रिया क्या है? A) The process of cooling to measure the dimensions आयामों को मापने के लिए ठंडा करने की प्रक्रिया B) The process of heating and bending as per our requirement हमारी आवश्यकता के अनुसार हीटिंग और झुकने की प्रक्रिया C) The process of heating to change the dimensions आयामों को बदलने के लिए हीटिंग की प्रक्रिया D) The process of heating and cooling to change the structure and properties संरचना और गुणों को बदलने के लिए हीटिंग और कूलिंग की प्रक्रिया 6 / 256) What is a total cost?कुल लागत क्या है? A) Raw materials cost and machining cost कच्चे माल की लागत और मशीनिंग लागत B) Advertisement cost only केवल विज्ञापन लागत C) Machining cost only केवल मशीनिंग लागत D) Raw material cost only केवल कच्चे माल की लागत 7 / 257) What is the value of x²-y² if (x+y) = 9, (x - y) = 4?x²-y² का मान क्या है यदि (x+y) = 9, (x - y) = 4 है? A) 46 B) 13 C) 65 D) 36 8 / 258) What is the principal amount deposited, if the maturity proceeds to an amount of Rs.25000/- and interest earned Rs.6000/-?यदि परिपक्वता राशि रु.25000/- और ब्याज अर्जित रु.6000/- की राशि तक पहुंचती है, तो जमा की गई मूल राशि क्या है? A) Rs.31000/- B) Rs.20000/- C) Rs.25000/- D) Rs.19000/- 9 / 259) What force will be required to punch a hole of 10 mm dia in a 1 mm thick plate, if the allowable shear stress is 50N/mm²? (π = 22/7)यदि स्वीकार्य अपरूपण प्रतिबल 50N/mm² है, तो 1 मिमी मोटी प्लेट में 10 मिमी व्यास के छेद को छिद्र करने के लिए किस बल की आवश्यकता होगी? (π = 22/7) A) 1575 N B) 1577 N C) 1571.4 N D) 1757 N 10 / 2510) What is the diameter of the circle, if the area of the circle is 706.5cm²?वृत्त का व्यास क्या है, यदि वृत्त का क्षेत्रफल 706.5 सेमी² है? A) 29 cm B) 30.5 cm C) 30 cm D) 29.5 cm 11 / 2511) Which process produce equilibrium conditions? कौन सी प्रक्रिया संतुलन की स्थिति उत्पन्न करती है? A) Annealing and Normalising एनीलिंग और सामान्यीकरण B) Normalising and Tempering सामान्यीकरण और तड़के C) Annealing and Hardening एनीलिंग और हार्डनिंग D) Normalising and Tempering सामान्यीकरण और तड़के 12 / 2512) What is the name of the structure formed, if a steel is heated for about 723°C? किसी स्टील को लगभग 723°C तक गर्म करने पर बनने वाली संरचना का क्या नाम है? A) Ferrite फेराइट B) Martensite मार्टेंसाइट C) Cementide सीमेंटाइड D) Austenite ऑस्टेनाईट 13 / 2513) What is the tensile stress if a square rod of 10 mm side is tested for a tensile load of 1000 kg?यदि १० मिमी भुजा वाली वर्गाकार छड़ को १००० किग्रा के तन्य भार के लिए परखा जाए तो तन्यता प्रतिबल क्या है? A) 100 kg/mm² B) 1000 kg/mm² C) 10 kg /mm² D) 1 kg/mm² 14 / 2514) What is the value of (6³) / ((-3)³) ?(6³) / ((-3)³) का मान क्या है? A) 27 B) 8 C) -27 D) -8 15 / 2515) What is the centre of gravity of the object?वस्तु के गुरुत्वाकर्षण का केंद्र क्या है? A) 90.6mm B) 89.25 mm C) 89.2 mm D) 90.0 mm 16 / 2516) What is the matured amount for the deposit of Rs.5000/- and the simple interest earned for Rs.500/-?रुपये 5000/- की जमा राशि के लिए परिपक्व राशि और 500/- रुपये के लिए अर्जित साधारण ब्याज क्या है? A) Rs.5500 B) Rs.4500 C) Rs.6000 D) Rs.6500 17 / 2517) 54) Where is the centre of gravity in ʹTʹ section?| Tʹ खंड में गुरुत्वाकर्षण का केंद्र कहाँ है? A) 8.02 cm B) 6.5 cm C) 8.545 cm D) 7.5 cm 18 / 2518) What is the minimum permissible size of aluminium wire used in estimation?आकलन में प्रयुक्त एल्युमीनियम तार का न्यूनतम अनुमेय आकार कितना है? A) 1.5 sq.mm B) 3.5 sq.mm C) 2.5 sq.mm D) 5 sq.mm 19 / 2519) What is the simple interest for the principal amount of Rs.100000 at 10% per annum for 1 year period?100000 रुपये की मूल राशि पर 1 वर्ष की अवधि के लिए 10% वार्षिक की दर से साधारण ब्याज कितना है? A) Rs.1000/- B) Rs.5000/- C) Rs.50000/- D) Rs.10000/- 20 / 2520) What is the tensile strain if a force of 3.2 KN is applied to a bar of original length 2800 mm extends the bar by 0.5 mm?यदि मूल लंबाई 2800 मिमी की छड़ पर 3.2 KN का बल लगाया जाता है, तो बार को 0.5 मिमी तक बढ़ा देता है, तो तन्यता विकृति क्या है? A) 0.0001786 B) 0.0001867 C) 0.0001687 D) 0.0001968 21 / 2521) What is the centre of gravity of the lamina?पटल का गुरुत्व केंद्र क्या है? A) 2.0 B) 1.45 C) 1.5 D) 1.55 cm 22 / 2522) What is the ratio of ultimate load to area of original cross section?अंतिम भार का मूल अनुप्रस्थ काट के क्षेत्रफल से अनुपात कितना है? A) Factor of safety सुरक्षा का कारक B) Yield point उपज बिंदु C) Ultimate stress अंतिम तनाव D) Youngs modulus यंग्स मॉड्यूलस 23 / 2523) What is the centre of gravity of the cone base 10cm and height 50 cm?शंकु आधार 10 सेमी और ऊंचाई 50 सेमी का गुरुत्वाकर्षण केंद्र क्या है? A) 11.25 B) 12.5 C) 12.75 D) 10.5 cm 24 / 2524) What is the value of a²+b² if a+b=9 and ab = 20?यदि a+b=9 और ab = 20 हो तो a²+b² का मान क्या होगा? A) 41 B) 121 C) -121 D) -41 25 / 2525) What is the radius of the semicircle, if the circumference of the semicircle is 28.26 cm?अर्धवृत्त की त्रिज्या क्या है, यदि अर्धवृत्त की परिधि 28.26 सेमी है? A) 8.5 cm B) 6.49 cm C) 8.75 cm D) 5.49 cm Your score isThe average score is 53% 0% Restart quiz Exit